How To fix a backpack zipper
In this article, we will discuss how To fix a backpack zipper mostly say what is broken can not be recollected in the same way again. Little do they know that this isn’t the case with your favorite backpack’s zipper.
How does it feel when you spend a whole lot of pennies for purchasing a chic backpack but it loses its utility just because of any issue with its zipper? We know that it sucks but as little as it can be a backpack is incomplete and useless without perfectly working zips
Also, it is super hard to maintain them in a running condition all the time because of the small size and extreme usage.
Check Out These backpack Reviews Also
- Original Anti Theft Backpacks
- Workout backpacks
- Insulated Backpacks with cooler compartment
- High Tech Backpack
- Fishing tackle Backpack
- Best wheeled backpack for europe
- Tactical backpack for laptop
Thus, here we have included all the common zipper problems one comes across with. We have also elaborated easy and not-so-time-consuming solutions for you all which are tried and tested.
Importance of a Zipper
Zippers are commonly used in our pants, jackets, backpacks and in various carriers and pouches. These are accessible with ease and effortless in use as compared to buttons or hooks. Because of their vast utility, they are available in a variety of styles. Zippers are made of metal, preferably aluminum, brass, antique brass and black oxidized ones. The durable type is made up of plastic which is resistant against rusting. While a new kind is being composed of coal in order to make them bear high temperature.
No matter of whichever material they are composed, your valued product will remain incomplete without them.
How do you fix a stuck zipper on a backpack?
How awful does it feel when you can not access your stuff just because a zipper wont cooperate! This is a very common problem about backpacks which needs to be addressed in order to make full usage of them. You don’t have to carry your bag to a cobbler or spend money in buying another rather just use few things easily available at home to fix these issues within no time. So let us see how to fix it.Things we need
⦁ Only a pair of pliers!
- Remove the iron stopper by the help of pliers.
- Now take off the zipper slider from it.
- Use pliers for bringing the ends of slider together.
- If it is really worn out, you can replace it with a new one.
- Now pull the zipper up and place the iron stop at its end.
Your zipper will not stuck anymore!
How do you fix a broken zipper slider?
The slider is the main part of a zipper and needs to be maintained properly. But due to excessive usage, the zipper slider also wears out with time and when so is the case, you don’t need to replace the entire zipper but just the zipper slider which can be done very swiftly.
Things we need
- End nippers
- Large needle nose pliers
- The zipper to the corner of the slider and remove the end by using a nipper.
Remove the slider.
- Insert a new slider
- Place a replacement stop in order to hold it on its place.
- Fix the stop along with a pair of pliers.
How do you fix a broken zipper on a lunch box?
No one wants to carry stale and musty food for lunch but this can happen when the zipper on your lunch kit loses its grip and exposes the food to air. This is a problem concerning health and needs to be fixed as soon as possible. Thus, we present you an easy way of fixing the zipper on your lunch carrier and making your life easier.
Things we need
- A pair of pliers
- A new zipper slider ( if needed)
- Remove the zipper stopper near the end.
- Also remove any prongs with the help of tweezers.
- Align the zipper properly in the middle of both sides with teeth.
- Carefully, insert any tape on sides of zippers in the hole with tweezers.
- Run the slider across the zipper.
- If it gets stuck, repeat the above process.
How do you fix a stuck zipper on fabric?
Majority of us have faced the issue of getting a zipper stuck with fabric. Now, this is not because the zipper has got frayed rather just a matter of co-incidence. But this tiny incident can mess up your zipper completely if you do not fix it carefully. We will see how to tackle this problem in the simplest way possible.
Things we need
- Paraffin or bar soap
- Sharped pencil
- Cotton swab
- Apply paraffin or soap with the help of cotton on the zipper and its side. This acts as a lubricant.
Try sliding it carefully
- If it doesn’t work, apply some vinegar to remove corrosion from the slider.
- After a while, it will slide out of the fabric comfortably.
How to fix a plastic zipper?
Another issue that we have noticed in this case is when we lose the hold of a plastic zipper on a backpack. Mostly, the zippers are made of metal but in the situation where it is of light plastic material.It makes the fixture more difficult. We have an easy hack to this problem though, so have a look.
Things we need
- A pair of pliers
- A new zipper (if needed)
- Sewing needle and thread
Remove the stopper with the help of pliers.
- Take off the zipper pull/slider from it.
- Now rake off the entire zipper by removing the stitches.
- Place a new zipper on its place and stitch the ends.
- Slide the zipper puller in.
- Attach the stopper and fix it with pliers
How can I make a zipper run smoother?
One of the thing which annoys people the most is a stiff zipper. A blunt zipper is more troublesome than a broken one but it can be tackled with some small and useful things.
The first thing is to check what is causing the slider to get stuck.
- If there is a problem with the teeth around it, use a plier to equalize them.
- Next, check out the slider itself, fix it up with a pair of pliers if the ends don’t meet.
- You can also use a lubricant like soap bar, paraffin or graphite to make the slider smooth and swift in use.
Tips for maintaining a backpack zipper
Well, you necessarily don’t have to opt for a solution when you can just avoid creating them in the first place by adopting few effortless tips.
You have to be careful about the type of zippers while choosing a backpack.
- A plastic molded zipper is easy to maintain as it is resistant and does not get rusted.
- Metal zippers are sturdy but can corrode overtime so its better to avoid them.
- Nylon zippers are cheap and water-proof, so should be chosen.
- Never force the slider across the zipper forcefully.
- In the case where slider gets stuck, apply vinegar or any other lubricant on it.
- Do not overload the backpack as it pressurizes the zippers and damages them.
- Apply paraffin wax after an interval on the zippers.
- Keep the zippers clean with soap and water.
- You can also use saltwater to clean it but not for metal zippers.
We have presented you a complete guide about fixing zippers of every kind in this article. You can improve the condition of your backpack by using these simple steps and enhance the durability of your bag. Also, it is very important to follow the tips in order to prevent any such damage in the first place.
If you found this information useful, share it with all around you!
Please follow and like us: